THERMODYNE UTILLIAN U8 Manual De Instrucciones página 29

Interface LED 2 flash-
es yellow 3 times
Interface LED 3 flash-
es yellow 3 times
Interface LED 4 flash-
es yellow 3 times
Operation of the Device EN
• Heating
element failure
• BurstHit
3D Heating
Chamber™
not correctly
inserted
• BurstHit
3D Heating
Chamber™
contact is
faulty.
Low voltage
protection active
• Overheat
protection
active
• Heating
element failure
• Fully screw the BurstHit 3D Heating
Chamber™ into the Base.
• Clean the contact between the Base and
the BurstHit 3D Heating Chamber™.
Grime can hinder the electrical
connection.
• BurstHit 3D Heating Chamber™ has
reached end of lifetime.
Potential failure of the battery. Contact
customer support.
Allow device to cool down. If error persists,
please contact customer support.
EN EN
29 29