Publicidad
Idiomas disponibles
Idiomas disponibles
a.Run the wire from the lawn perimeter to the object.
b.Continue circle around the objects in a clockwise direction. When going around
s
s
the object use more pegs. Remember to leave 30cm around the object to the wire!
s
s
c.Return the wire back to the perimeter（Note：the distance between two wires
requires less than 5mm and do not cross over the wires at any point ). Ensure
s
s
the distance from the wire around the object and lawn perimeter is at least 75cm
(if less than 75cm surround the object when installing the wire, leaving the object
outside of the lawn cutting area).
5.Others
Paths, Driveways and Roads
If an elevated driveway crosses your lawn, better keep it outside the boundary wire.
E
N
Please allow a safety distance of 40cm between the driveway and the boundary
E
N
wire.
EN
EN
E
N
If the driveway and lawn are at the same level, feel free to use the boundary wire
to create a corridor. This allows your robotic mower to cross the driveway and
reach the opposite lawn.
6
Original instructions
6
11
EN
EN
Publicidad
