Publicidad
Idiomas disponibles
Idiomas disponibles
Signal select button
Rain sensor button
rain; Lights out, no work in the rain.
7
OK button
Used with the Start/Home button.
Charging indicator
9
Signal indicator
GPS signal indicator
12
Power indicator
Basic Operation
Start mowing
1.
Press Unlock button ,START button and OK button in order, then the
mower will start mowing.
Return to charging station
2.
Press unlock button
Stop the robotic mower
3.
It is allowed to stop your robotic mower by pressing the STOP button in any
situations.The stop button has the highest priority, the robotic mower
will stop immediately in any case.
Cutting height adjustment
4.
The cutting height can be adjusted by rotating the height adjustment knob.
Cutting height range from 20mm- 55mm.
5
Select signal either P1 or P2.
6
Switch rain sensor On/Off. LED remain on to allow working in the
8
LED will flash when the robotic mower is charging.
LED will remain on when the P1/P2 is selected.
11
LED will remain on only when the GPS signal is normal.
LED will remain on when the ON/OFF switch is on.
3
3
, then press HOME button
Original instructions
1
4
and OK button
14
7
7
EN
EN
Publicidad
