Publicidad
How to Use
Turning on/off
Switching mode
Press the power button to
While the purifier is on, press
turn on/off the purifier.
the mode switch button to
cycle through modes.
Resetting Wi-Fi
Enabling/Disabling Wi-Fi
When connecting the purifier to the app
for the first time or unable to connect to it,
To enable or disable Wi-Fi,
press and hold the light adjustment button
simultaneously press and hold the
for 7 seconds. Once the Wi-Fi is successfully
mode switch button and the light
reset, the purifier will make a notification
adjustment button for 15 seconds.
sound and the Wi-Fi indicator will blink.
The Wi-Fi indicator is on when the
Once the Wi-Fi is connected successfully,
Wi-Fi is enabled, and is off when the
the Wi-Fi indicator will remain lit.
Wi-Fi is disabled.
If the Wi-Fi connection fails after a timeout,
the Wi-Fi indicator will go out.
Adjusting the display's brightness
Press the light adjustment button to
cycle through its brightness levels:
on, dim, and off.
Filter Exhaustion Reminder
When the filter is exhausted, the filter
exhaustion indicator on the display will blink.
6
Enabling/disabling the child lock function
To enable or disable the child
lock, press and hold the mode
switch button for 7 seconds.
The child lock indicator is on
when the child lock function
is enabled, and is off when the
function is disabled.
Connecting with Mi Home/Xiaomi Home app
This product works with Mi Home/Xiaomi Home app*.
Control your device with Mi Home/Xiaomi Home app.
Scan the QR code to download and install the app. You
will be directed to the connection setup page if the app is
installed already. Or search "Mi Home/Xiaomi Home" in the
app store to download and install it.
Open Mi Home/Xiaomi Home app, tap "+" on the upper right,
and then follow prompts to add your device.
*The app is referred to as Xiaomi Home app in Europe (except
for Russia). The name of the app displayed on your device
should be taken as the default.
38183F11
Note: The version of the app might have been updated,
please follow the instructions based on the current the
app version.
Daily Care & Maintenance
Warning: Make sure the purifier is turned off and the power
adapter is unplugged before replacing the filter.
Replacing the Filter
Remove the old filter and install a new one correctly as illustrated.
Resetting the filter
While the purifier is on standby, press and
hold the power button for 6 seconds. When
the filter is successfully reset, the purifier
will make a notification sound and the air
quality indicator will remain green for 1
second.
Note: It is recommended to replace the filter every 6 to 12 months.
Please purchase genuine and compatible filters from official
channels.
7
Publicidad
