Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting
Fault
The fan doesn't work
Unable to connect to Wi-Fi
Fan blades are stuck
Ba ery level indicator does not light up The ba ery enters into sleep protection.
The oscillation function does not work. The fan is under the auto-oscillation state.
Specifications
Name
Mi Smart Standing Fan Pro
Model
ZLBPSP01XY
Type
Standing Fan
Net Weight
3.2 kg
Wireless Connectivity
Wi-Fi IEEE 802.11b/g/n 2.4 GHz
*Radio frequency and radio transmission power
RF Specification
2.4 G Wi-Fi
Possible Cause
The stand does not properly connect to
the fan base.
Child lock is enabled.
Ba ery is depleted.
The Wi-Fi connection is 5 GHz.
The fan has been offline for more than half an hour.
Fan blades are stuck by a foreign object.
Rated Voltage
Rated Power
Noise Emission
Item Dimensions 950 × 343 × 330 mm
Operation Frequency
2412-2472 MHz
Install the fan base with the stand correctly.
Disable the child lock function.
Connect the charging base to use it as the power source.
Connect to a 2.4 GHz Wi-Fi network.
Reset the Wi-Fi connection.
Unplug the fan and remove the foreign object.
Connect the charging base to activate the ba ery.
Wait for the auto-oscillation completes. It will last
for 14 seconds at most.
12 V
Ba ery Type
24 W
Ba ery Capacity
≤55 dB(A)
Charging Input
Limited Charging Voltage
Operating Temperature
10
Solution
Lithium-ion Ba ery
2800 mAh
12 V
2 A
14 V
0°C to 40°C
Maximum Output Power
<20 dBm
Publicidad
