Publicidad
Idiomas disponibles
Idiomas disponibles
How to Use
Charging
· It is recommended to fully charge the fan before use.
· Connect the charging base to the charging port on the bo om of the
fan base, then plug in the charging base.
· When the ba ery level indicator is blinking, the fan is successfully
connected to the charging base.
· You can use this fan by either connecting to a power outlet or not.
The fan is equipped with a built-in Wi-Fi module, and energy
consumption occurs even when it is turned off. Fully charge the
fan then turn it off, the ba ery can last for approximately 2 days.
To maintain optimal ba ery performance, it is recommended to
keep charging the fan if it is not in use.
Connecting to a power outlet
Fan Status
Ba ery Level
≤30%
On/Off
30–100%
100%
Ba ery Level Indicator
Blinking orange
Blinking white
Off
Not connecting to a power outlet
Fan Status
Ba ery Level
30–100%
On
1–30%
0%
0–100%
Off
Turning On/Off
Turning On
Press the bu on
to start the fan. When turned on for the first time,
the default speed is slow (1) and the mode is direct breeze.
Turning Off
Press the bu on
to stop the fan while it is running.
Switching Speed/Mode
Switching Speed
Press the bu on
to adjust the speed, and the corresponding
indicators will light up (see table below). A er the fan is turned off
and turned back on again, the speed will be the last used one.
Speed
Slow (1)
Medium (2) Fast (3) Turbo (4)
Indicator
Note:
means the indicator is on;
7
Ba ery Level Indicator
White
Orange
Off (The fan will
automatically turn off)
Off
means the indicator is off.
Publicidad
