Publicidad
Idiomas disponibles
Idiomas disponibles
EN
brush. Clean the cutting element cover and the rotating brush from impurities generated during operation. If the cutting element
cover and/or the rotating brush is damaged, replace it before performing further work. It is forbidden to use the machine with a
damaged cutting element cover and/ or the rotating brush.
Clean the tool's housing with a soft, dry cloth. Clean the housing from grass residues, oil, grease, and other contaminants. Store
the disconnected tool in a dry and closed room.
Store the tool in shaded and dry places with appropriate ventilation preventing steam condensation. Such place should not be
accessible to unauthorised persons, especially children. During storage, the blades should always be protected with a cover.
O R I G I N A L
I N S T R U C T I O N S
17
Publicidad
