Uline H-7250 Manual De Instrucciones página 2

ASSEMBLY CONTINUED
4. Loosen connection point on mop handle. Adjust 5. Place mop head over single mop cover. Lift one
to desired length and retighten by turning clamp, and place edge of mop cover under clamp.
counterclockwise. (See Figure 3) Gently release clamp. (See Figures 4 and 5)
Figure 3
Figure 4
Figure 5
6. Repeat for each clamp.
1-800-295-5510
uline.com
PAGE 2 OF 6 0521 IH-7250