Publicidad
Idiomas disponibles
Idiomas disponibles
Pass the cable through the notch provided for this purpose and then fix the base to the
column by assembling the two parts as shown in the diagram opposite using the screws
and nuts provided (use a suitable screwdriver, not supplied with the unit).
Be careful not to pinch the cable during assembly!
Once the installation is complete, place the fan on a stable and clean surface.
Important : Never use the fan without its base!
This device can be operated with a remote control or directly from the control panel.
B-CONTROL PANEL
Key:
ON/ OFF: to start, standby or turn off the fan
Key:
SPEED: to set the ventilation speed of FORT / MODERATE / LOW.
Key:
SWING. Press this button to oscillate the fan.
Key:
TIMER: to set the timer which can be used for up to 15 hours of operation.
13/31
Publicidad
