Daspi DS059 WOLF SD BF 230V Manual De Instrucciones página 6

Machine Translated by Google
CONTROL PANEL FOR SLIDING DOOR
Control panel for sliding door for 220 V motor (with or without encoder).
220 V AC panel power supply, built-in RX Multi radio receiver, force regulation and soft stop at the end
of the opening and closing manoeuvres.
• The automation maneuvers are executed with the START button (1-2) or by means of a
programmed command.
• The maneuver ends by activating the corresponding limit switch or by
end of operating time.
• If an order is given during the opening maneuver, the maneuver ends and the automatic closing is not
executed.
• The activation of the stop (6-7) causes the immediate stoppage of the manoeuvre, being
An order is required to resume the maneuver.
• The activation of the safety contact (5-6) in the closing maneuver supposes its inversion,
causing the opening.
• The garage light contact is activated for 3 minutes after starting the manoeuvre.
• The motor force regulation is applied 2 seconds after starting the
maneuver.
DS059 WOLF SD BF 230V
COMPATIBLE WITH BFT
FUNCTIONING