Kumio ICE-1032 Manual De Instrucciones página 13

TROUBLESHOOTING
Problem
Appliance does not start.
After the operation
finished, the container is
difficult to remove.
Ice cream is not ready yet,
but mixing blade
stopped.
Container can not be properly
inserted into the cooling
drum .
When operation is started,
the mixing blade severely
scratches the sides of the
container or gets stuck.
Possible cause
Power plug
an electrical
plugged in tightly.
is Drops of water have frozen
between the container and the
cooling drum .
When the ice cream becomes
has harder, the mixing blade may get
stuck, causing the motor to be
turned off
prevent overheating.
Improper use of container has
lead to deformation.
Improper use of container has
lead to deformation.
is not connected to
outlet or not
automatically to
11
Solution
Connect power plug to a
suitable electrical outlet. Make
sure to plug it in tightly.
Wait until the frozen water has
molten. Then remove
container.
Remove the container, turn off
the appliance and then restart
it.
Purchase a new
from an authorized vendor or
service center.
Purchase a new container from
an authorized vendor or service
center.
the
container