MSW Motor Technics MSW-LMM-02 Manual De Instrucciones página 17

1. Label adjustment
2. Label roller
3. Bottle location
Place the roller with labels on the shaft [B], install in accordance with
ASSEMBLING THE DEVICE. Manually set the label [A] position. Place the
labeling bottle [C]. To stick the label, turn the crank clockwise.
3.3.
Cleaning and maintenance
a) Use only non-corrosive cleaners to clean the surface.
b) Store the unit in a dry, cool place, free from moisture and direct exposure to
sunlight.
c) Do not spray the device with a water jet or submerge it in water.
d) Use a soft, damp cloth for cleaning.
e)
Do not use sharp and/or metal objects for cleaning (e.g. a wire brush or a metal
spatula) because they may damage the surface material of the appliance.