Hamilton Beach Commercial HBH855 Serie Manual De Operación página 5

Control Panel
Start/Stop ( ) and
Variable Speed Start Button
NOTES:
• Press any Button
to stop operation.
• In Program Cycle:
To add or reduce
time in 5 second
increments, press
or .
• In Menu Mode:
5 is Back/Cancel
is Scroll Up
is Scroll Down
is Enter/Accept
Blender Operation – Quick Start Guide
1. Read Important Safety Instructions and Warning
Symbol Explanations before use.
2. Place Blender on a dry, level surface.
3. Make sure Power Switch is OFF ( ). Plug Blender
into a grounded 3-prong electrical outlet.
Sanitizing
Sanitize using 1 tablespoon (15 mL) of household
bleach per 1 gallon (3.8 L) of clean, cool water
(60°F/16°C), mixed according to instructions on
bleach.
1. Fill Jar with sanitizing solution, replace Jar Lid and
Filler Cap and run on a low speed for 2 minutes.
Empty Jar.
Pulse ( ) Button
Display
Program Cycle Buttons
1
4. Place Jar on base with ingredients and Jar Lid in
place. Close Quiet Shield™ door.
5. Turn Blender on by pressing Power Switch to ON
(l). Red LED Light indicates power is on.
6. Select desired function.
7. Use any button to stop operation.
2. Wipe exterior with soft cloth dampened with
sanitizing solution.
3. Immerse Jar Lid and Filler Cap in sanitizing
solution for 2 minutes.
4. Place empty Jar on base and run on HIGH speed
for 2 seconds to remove any moisture from Cutter
Assembly.
5. When ready to use, rinse with clean water.
Speed and Time Control Buttons
Programmable
Auto Blend
2
24" MIN
(61 cm)
4" (10 cm)
58" MAX (147 cm)
5