Publicidad
Idiomas disponibles
Idiomas disponibles
CLEANING AND MAINTENANCE
1. Be sure the plug has been removed from outlet.
2. Remove can opener lever by lifting and pulling
toward you. Wash by hand with hot, sudsy water.
Dry thoroughly.
3. Wipe body of can opener with damp cloth.
(Caution: Do not immerse in water.)
4. Replace can opener lever by holding in the raised
position and pushing back into place. Be sure the lever
is pushed all the way in.
5. Any other servicing should be preformed by an
authorized service representative.
SUGGESTIONS
This can opener will open all standard size cans.
It should not be used on cans that have alternate methods of
opening (including but not limited to pull-tabs, rolling key and
peel-off foil). It also should not be used with rimless cans or
cans with angled corners.
Cans with aluminum lids will not adhere to magnet.
If there is a dent in the rim of the can, open other side or place
the Power Cut
use a light touch to turn the can to aid the cutting process.
blade beyond the dent. If the can opener stalls,
®
Publicidad
