Publicidad
Idiomas disponibles
Idiomas disponibles
ACTIVATE THE TIMER BEFORE USE
Please activate the device before using it for the first time or
after a period of inactivity.
Activation steps：
If yes, the timer valve is normal, please use it with confidence!
If not, please repeat the above steps several times or contact
RAINPOINT support team immediately.
Note:
When testing, please keep away from the water timer outlet to
avoid being splashed and wet.
1. Keep the garden faucet turned off.
2. Turn the timer dial to "ON".
3. Press and hold the "MANUAL" button for
3-5s to enter Manual Watering Mode.
4. When the screen flashes, press the "OK"
button to run manual watering.
5. After hearing the "click" sound or waiting for
about 5 secs, the valve in the timer is
opened, then turn the dial to "OFF" to close
the valve.
6. Repeat step 2 - 5 for 3-5 times.
7. Test: Turn on the faucet a little bit, and then
repeat step 2-5 to check if the water flow
out or shut off as expected.
- 06 -
Publicidad
