Publicidad
Idiomas disponibles
Idiomas disponibles
auta
Monitor de vídeo con pantalla plana. Permite visualizar la imagen captada por la cámara de la placa exterior
identificando al visitante y comunicación duplex. Incorpora indicadores luminosos de funcionamiento, 2
pulsadores auxiliares, regulación de brillo y contraste, conmutador de encendido/apagado y 6 pulsadores
para la llamada y comunicación entre los monitores.
Video monitor with flat screen. It lets to visualize the image taken by the external panel camera identifying the
visitant and duplex communication. It incorporates functioning lights, 2 auxiliary push-buttons, brightness,
contrast control, on / off switch and 6 push button for call and comunications with monitors.
CARACTERÍSTICAS - CHARACTERISTICS
Instalación en superficie o con caja universal 60X60.
Surface installation or with universal box 60 X 60
Iinyectado en plástico ABS
Injected in ABS plastic
Conmutador On/Off
On / Off switch
Ajuste de brillo y contraste
Brightness and contrast adjust
Cable rizado con conectores telefónicos
Phone cord with connectors.
DIMENSIONES -
(mm)
Dimensions
195
50
230
DESCRIPCIÓN - Description
B
A
AUX
6
6
5
5
4
3
4
2
1
3
6
5
2
4
3
1
2
1
I
J
K
Descripción
Description
CARACTERÍSTICAS TÉCNICAS
TECHNICAL CHARACTERISTICS
Freq. de barrido 15625Hz (H) 50 Hz (V)
Scanning frequency 15625 Hz (H) 50 Hz (V)
Señal entrada de vídeo 1Vpp (75
W
) con vídeo
compuesto.
Input video signal 1Vpp (75..) with composite video
Alimentación 24 Vcc / 0.5A
Supplying 24 Vcc/0,5A
A
Brazo telefónico - Phone handset
B
Tecla de cuelgue - Push switch
Pantalla de imagen - Image screen
C
D
Indicador luminoso - Light indicator
E
Abrepuertas/LLamada central
Door opener/Call to central
C
F
Autoencendido/Videoespía
Self-starting/Video spy
G
Cámara auxiliar - Auxiliary camera
H
Pulsador auxiliar - Auxiliary push-button
I
D
On/Off
E
J
Brillo - Brightness
F
K
Contraste- Contrast
G
*Monitor color : Ajuste de color
H
Colour monitor: colour adjust
L
Pulsadores Llamadas INTERCOM
L
Call INTERCOM push button
M
M
Directorio / Directory
1
MONITOR ANALOGICO INTERCOM/INTERCOM ANALOGICAL MONITOR
auta
MONITOR INTERCOM FUNCTIONING:
The Intercom System performs as an analog video door entry system and allows the communication between
the monitors.
CALL FROM PANEL
A confirmation call tone will sound on the panel when a push-button is pressed then the system will perform
as follows:
- The monitor will ring and the traffic LED will turn on.
- The picture comes up on the monitor. Communication with panel is established picking up the
handset.
SELF-STARTING
Video communication with the panel can be established from the monitor pushing self-starting button. Picking
up the handset we will also get audio communication being able to release the door.
DOOR RELEASE
- To release the door the button
-There is not need to pick up the handset to release the door.
- The door release does not cut the video picture off.
- The door cannot be released when monitor - to - monitor communication established.
INTERCOM FUNCTIONING
To intercom monitor 1 to monitor 2, for example, follow the next steps:
1. Self-start the monitor 1.
2. Pick up the handset and push the key with number 2.
3. Monitor 2 will ring (the ring tone is different to the panel's calling tone).
4. Monitor 2 will turn on. To establish communication pick up the handset.
5. The system allows all - to - all communication up to 6 units.
6. Maximun conversation time 90 seconds.
7. The panel has priority during monitor - to - monitor intercom.
Distribución en cascada/Distribution in cascade
must be pressed.
6
Publicidad
