Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Wireless Fast Charge Powerbank
2.3 Operating Elements
See Fig. 1.
1 LED status indicator
2 Wireless charging
interface
3 Function button
4 USB-C™ socket
3 Intended use
We do not permit using the device in other
ways like described in chapter „Description
and Function" or in the „Safety Instructions".
Use the product only in dry interior rooms. Not atten-
ding to these regulations and safety instructions might
cause fatal accidents, injuries, and damages to persons
and property.
IP20: This product is protected against medium sized
foreign objects, but not against water ingress.
4 Preparation
1. Check the scope of delivery for completeness and
integrity.
2. Compare the specifications of all used devices and
ensure compatibility.
5 Connection and operation
5.1 Switching the powerbank on and off
• Press the function button 1x to switch on the pow-
erbank.
• Press the function button 2x to switch off the pow-
erbank.
The powerbank turns on automatically when you con-
nect a mobile device. The powerbank switches off au-
tomatically after 30 seconds if no mobile device is con-
nected.
5.2 Charging the powerbank
The powerbank is supplied partially charged.
Fully charge the powerbank before using it for the first
time!
1. Connect the USB-C™ or Micro-USB socket of the
powerbank to a USB power source via a charging
cable.
This can either be a 230 V USB charging adapter, a
12/24 V car USB charger or the USB socket of a PC.
2. Disconnect all cable connections after charging.
5.3 Charging a mobile device via cable
connection
1. Connect your mobile device to the USB-C™ socket
or one of the USB-A sockets.
Your mobile device will start charging.
It is not recommended to charge multiple mobile devi-
ces at the same time via the powerbank. If several de-
vices are being charged at the same time, the Quick
Charge function cannot be used.
2. Disconnect all cable connections after charging.
5.4 Charging a mobile device via the
charging interface
• Place a compatible mobile device on the wireless
charging interface.
Your mobile device will start charging.
REV2023-05-24
Subject to change without notice. |
V1.1aw
Sous réserve de modifications.
5 USB-A QC 3.0 socket
6 Micro USB socket
7 USB-A plug
8 USB-C™ plug
5.5 Checking the charging status
See Fig. 2.
Briefly press the function button to display the battery
status. If no LED lights up despite pressing the function
button, the powerbank is completely empty.
During the charging process, LED 1-4 flash white. LED
1 lights up green when Quick Charge is active. LED 4
lights up blue when a mobile device is being charged
via the wireless interface.
6 Maintenance, Care, Storage and
Transportation
NOTICE!
• Only use a dry and soft cloth for cleaning.
• Do not use detergents or chemicals.
• Charge the batteries every three months to ensure
they maintain capacity when not in use for an exten-
ded period of time.
• Store the product out the reach of children and in a
dry and dust-protected ambience when not in use.
• Store cool and dry.
• Keep and use the original packaging for transport.
7 Disposal instructions
7.1 Product
According to the European WEEE directive,
electrical and electronic equipment must not be
disposed with consumers waste. Its compo-
nents must be recycled or disposed apart from
each other. Otherwise contaminative and hazardous
substances can damage the health and pollute the en-
vironment.
As a consumer, you are committed by law to dispose
electrical and electronic devices to the producer, the
dealer, or public collecting points at the end of the devi-
ces lifetime for free. Particulars are regulated in natio-
nal right. The symbol on the product, in the user manu-
al, or at the packaging alludes to these terms. With this
kind of waste separation, application, and waste dispo-
sal of used devices you achieve an important share to
environmental protection.
WEEE No: 82898622
7.2 Packaging
Packaging can be disposed of free of charge at
the suitable collection points – paper belongs in
paper bins, plastics belong in yellow sacks and
glass belongs in used glass bins.
DE4535302615620
8 EU Declaration of conformity
Hereby Goobay®, a registered trademark of
Wentronic GmbH, ensures that the mentio-
ned radio system type is conformed to Di-
rective 2014/53/EU. The full text of EU Declaration of
Conformity is available at the following Internet ad-
dress: https://www.wentronic.com/en/
Enter the item number in the search bar to go to the
specific item page. The current declaration of conformi-
ty is available in the download section.
- 5 -
Pillmannstraße 12 | 38112 Braunschweig | Germany
53933
Material damage
Goobay® by Wentronic GmbH
Publicidad
