Publicidad
Idiomas disponibles
Idiomas disponibles
Assembly;
Perform these steps on a flat surface, and never with the awning installed and
fixed on the wall.
Observe the interior of the big and small side end caps; All have an L and an
R written inside.
Big side end caps;
Place the piece with the L written on the left side of
the awning. L (left), and place the R on the right side
of the awning. R (right).
You will hear a 'click' when it is perfectly fixed.
Small side end caps;
To place the small side end caps, you must first remo-
ve the plastic part indicated in the attached drawing.
Once removed, the small RAY / NOE side end caps
are inserted with pressure inside the sides of the front
bar, if you see that it does not fit correctly, use a rub-
ber mallet with slight touches for a perfect fixation.
Publicidad
