Publicidad
Idiomas disponibles
Idiomas disponibles
LED DISPLAY MEANING
•
C0-ZZONE6000MC
•
C1-MP3 Module
•
C2-MIC1/Line1
•
C3-MIC2/Line2
•
C4-MIC3/Line3
•
C5-AUX
•
C6-EMC
•
C7-Local input
•
C8-Mute
OPERATION
When all connections to the amplifier are made, turn all rotary controls down and switch on
the power and the power LED will illuminate.
To check for correct operation of the system, select an input source and output zone for
testing. In the following example, Mic/Line 1 input and Zone 1 output have been selected.
• Press Z1 button on the line of MIC/Line1, if zone1 display C2, that means MIC/Line1
output to zone 1
• If you playing MP3, press zone1 on the line of MP3, then zone 1 will have MP3 music and
display on Zone1 will show C1
If Zone 1 cannot be heard from the location of the ZZONE2120PA, use the monitoring feature
as follows
• Press the button of Monitor and connect headphones to the Monitor output
• Make sure that the Monitor button for Mic/Line 1 is pressed in and listen through the
headphones
• Gradually turn up the Monitor level control and check for the output to Zone 1
ONBOARD MULTI SOURCE AUDIO PLAYER
The ZZONE2120PA is fitted with a built-in audio player, operated via a backlit LCD display
and transport buttons. This section provides access to a Bluetooth™ receiver, FM radio tuner
and USB/SD audio player In order to play audio to one of the zones, it is necessary to press
in one of the "Play" buttons (4).
1. LCD Display
2. TF Slot
3. Mode: Select between Bluetooth, FM tuning,
USB or SD playback
4. Play: play music
5. Folder: hold on the music
6. RPT: repeat the music
7. Prev: Back to last music - Vol-: Reduce Volume
8. Next: go to next Music - Vol+: Increase volume
9. USB Slot
10. IR Receiver
Short press: Prev& Next
Long Press: Vol+&Vol-
7
Publicidad
