Becken BDD4869 Manual De Instalación página 20

Tools required
Not provided
8 mm socket wrench Thin-blade screwdriver Putty knife
Cross-shaped screwdriver Monkey wrench 8 mm wrench
Additional parts (in the plastic bag)
Left Hinge Cover
Note: If required you may lay the refrigerator on its back in order to
gain access to the base; you should rest it on a soft foam packaging
or similar material to avoid damaging the refrigerator backboard. To
reverse the door, the following steps are generally recommended.
1. Use a putty knife or thin-blade screwdriver to remove the screw hole
cover, located at the top left corner of the refrigerator, and the upper
hinge cover, located at the top right corner of the refrigerator.
20