Publicidad
Idiomas disponibles
Idiomas disponibles
EN
2. Unscrew the special flange self-tapping screws which are used for
fixing the right upper hinge part with an 8 mm socket driver or spanner
(please support the upper door with your hand when doing it).
3. Remove the upper hinge axis, transfer it to reversed side, tighten it
securely and then put it in a safe place.
4. Remove the door from the lower hinge
NOTE: When removing the door, watch for washer(s) between the
lower hinge and the bottom of the lower door that may stick to the
door. Do not lose.
21
Upright Freezer | Congelador Vertical | Arca Vertical
Publicidad
