Descargar Imprimir esta página

FUXTEC FX-GS36 Manual De Instrucciones página 19

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

13. Intended use
The spreader is to be used exclusively for spreading granules.
If your spreader does not distribute the granules evenly, make sure that the front of the gearbox points
to the front of the spreader. The impeller must turn clockwise. Reversing the gear will cause the impeller
to rotate counterclockwise. Clean the paddlewheel after each use. Residues on the bucket wheel cause
uneven distribution.
Your spreader is designed to give the best spreading results when pushed at 5 km/h (fast walking).
Slower or faster speeds will change your spreading pattern. Moist grit or granulate changes the flow
velocity and thus also the spreading pattern. Clean your spreader thoroughly after each use. Gears are
already lubricated at the factory
14. Preparation and security
Wear face protection or safety goggles during use
Wear appropriate clothing. Only wear closed shoes with non-slip soles. Use of the granulate
spreader with sandals or barefoot is prohibited
Wear close-fitting clothing. Avoid too loose clothing
Wear non-slip gloves during use
If necessary, wear a dust mask, starting from the material to be scattered
Long hair should be bound back
Apply directional markings before using the granulate spreader
Use only in daylight or good artificial light
Read and follow all instructions of the chemical manufacturer
ATTENTION
During work, the line of sight must be directed to the surface to be processed; do not be
distracted
Ensure a secure stand and direction of movement. Caution on unpaved or slippery surfaces
Attention: Chemicals or materials that are hazardous to the environment should be avoided
Follow all guidelines of the chemical manufacturer
19
Original User Manual FUXTEC FX-GS36

Publicidad

loading