FUXTEC FX-GS36 Manual De Instrucciones página 23

Step 2
• Take the 2 wheel suspensions and connect them to the axle as shown
• Bolt the ends of the connecting tube with the left and right suspension with M6X40 bolts and M6
nut
• Connect connecting tube with the shaft carrier plate
• Connect attached support leg with wheel suspension and funnel with M6X70 bolts, M6 nut, and
6 mm washer
Remark: The screws should not be tightened; just pre-assemble for the time being!
23
Original User Manual FUXTEC FX-GS36