Kicker PTRTP Manual Del Propietário página 6

Wiring
Disconnect the vehicle's battery to avoid an electrical
short.
1. Make the ground wire as short as possible, 24"
(60cm) or less, and connect the ground wire to a
paint-and-corrosion-free, solid, metal area of the
vehicle's chassis.
2. Connect the ground wire to the Quick-Connect
Power Plug.
3. Run power wire to the battery.
4. Install a fuse holder in-line with the power wire as
close as possible to the battery (within 18"), making
sure there is no fuse installed in the fuse holder.
5. Connect the power wire to the Quick-Connect
Power Plug.
6. Connect remote wire to the Quick-Connect Power
Plug (See Automatic Turn-On section to learn more).
7. Connect the Quick-Connect Power Plug to the
amplifier.
8. Install the recommended fuse into the in-line fuse
holder.
9. If you ever need to remove the enclosure from
the vehicle after it has been installed, please make
sure to remove the fuse from the fuse holder on the
power wire first before unplugging the quick-connect
power plug. The ground wire should be the last
wire disconnected – just the opposite as when you
installed it.
Model
PTRTP10
PTRTP12
English
Installation
External Fuse (sold separately) Power/Ground Wire
1 x 40 Ampere
1 x 60 Ampere
4 Gauge
4 Gauge
KICKER Wiring Kit
KMPK4, PK4, CK4
KMPK4, PK4, CK4
5