Lenco L-85 Manual De Instrucciones página 9

- Place the record of your choice on the turntable. If it is a 45 rpm, do not forget to place the
adaptor (1) on the record spindle.
-
Choose the desired playing speed:
o 33 rpm -> button unlocked
o
45 rpm-> button locked.
-
Release the pick-up arm clip.
- Place the cartridge vertically over the first track of the record, the turntable starts turning.
-
When the record is over, the pick-up arm returns to its rest , the turntable stops turning
Take care that the pick-up lift stick is in forward-turned (lift down), close pick-up arm lock to
secure pick-up arm.
Technical specification
Power Supply: AC100-240 60/50HZ
Power Consumption: 12W
Wow & Flutter: 0.25%
Distortion: 3%~4%
S/N: 50 dB
Audio Output Voltage: 500mV ±200mV
USB: 5V/500 mA
*IMPORTANT RECOMMENDATIONS
We advise you to clean your records using an impregnated rag with an antistatic product for
maximum enjoyment of your records and also to make them last.
We would also point out that for the same reason your stylus should be replaced periodically
(approximately every 250 hours).
Dust the stylus from time to time using a very soft brush dipped in alcohol (brushing from the back
to the front of the cartridge).
9