MPM MKR-05 Instrucciones De Funcionamiento página 15

DEVICE DESCRIPTION
6
7
1.
Slicer housing
2.
Slicer footer
3.
Blade disk
4.
Blade disk mounting knob
5.
Slicer trolley footer
6.
Pusher bar
BEFORE FIRST USE
1. Remove the device from the packaging, remove all stickers, plastic bags, fillers and shipping
safeguards.
2. The device should be cleaned according to the instructions in the "CLEANING AND MAINTE-
NANCE" chapter.
3. Assemble the slicer trolley by connecting the pusher bar (6) to the slicer trolley footer (5), as
shown in the photo above.
4. Unfold the slicer footer (2) and place the slicer trolley on it. Ensure that the catch on the lower
part of the slicer trolley correctly engages with the mounting groove in the edge of the slicer
footer (2).
5
2
7.
8.
9.
10. Thickness adjustment knob (range:
8
1
10
Pusher
Slicer on/off switch
Safety button
0-15 mm)
9 4
3
15