PowerBoozt PB 2104-S Instrucciones De Uso página 4

Configuring
The PB-2104C can be set by turning the potentiometer located between
the input and output connections.
When the potentiometer is turned fully to the left, setting #1 is selected
and the PB-2104C will function as as in converter with a 13.8 V output
voltage. If the potentiometer is turned fully to the right, setting #7 is
selected. The PB-2104C will then function as a charger with a
voltage
of 14.6 V and a
Technical details
Input
Supply voltage
Range
Overvoltage Limitation
Reset
General
Connections
Cable recommendations
Dimensions (h x w x d)
Weight
Operational temperature
Standby current
Eigenschaften
 Wandler oder Ladegerät
 Es kann kein Strom durch
den PB-2104C vom Ausgang
zum Eingang fließen.
Zweck
Der PB-2104C ist ein geschalteter Wandler mit zwei Funktionen.
1. Normaler Wandler mit einer Ausgangsspannung von 13,8 V.
2. Ein zweistufiges Ladegerät mit einer gesteuerten 24-Stunden-Ladefunktion.
float voltage
of 13.8 V.
24 V DC
18.0 V ... 35.0 V
DC
> 32.0 V DC
< 31.8 V DC
4 x 6.3 mm
faston
2
2.5 mm
50 x 98 x 88
mm
290 g
-10 °C ...
+40 °C
±18 mA
 Sehr niedriger
Stromverbrauch.
Setting Type
#1
#2
boost
#3
#4
#5*
#6
#7
* Factory setting
Output converter
Voltage
Stabilisation
Current limitation
Output charger
Voltage
Charge forcing
Stabilisation
Current limitation

PB-2104C
Configuration table
Output voltage
Boost
Converter 13.8 V
Charger 14.1 V
14.2 V
14.3 V
14.4 V
14.5 V
14.6 V
13.8 V DC
±1%
±5 A
Boost 14.1 V ... 14.6 V
DC
Float 13.3 V ... 13.8 V
DC
every 24 hours
±1%
±5 A
Einfache Installation.
Float
13.3 V
13.4 V
13.5 V
13.6 V
13.7 V
13.8 V
EN_DE_ES_FR_NL