APEX FORGE M8 Manual Del Usuario página 13

Step 3. Position the Shield such that it will redirect debris, sparks, and dust away from the user using
the positioning tabs C . (See Figure 12)
Using the Shield Rotary Tool Attachment:
Always turn tool power off before adjusting position, changing accessory, and removing attachment.
Rotary Tools cut, sand, grind, and polish in many directions. To accommodate the Rotary Tool's Maneu-
verability, the Shield can be quickly positioned and repositioned with a turn to the right or left .To extend
the life of the Shield periodically clean with a soft bristle brush or compressed air.
Fig.11 Fig.1
A
Fig.12
- 11 -
Fig.13 Fig
C
B
C