Publicidad
Idiomas disponibles
Idiomas disponibles
DRON PARTS
OPERATION
BATTERY CHARGE
Connect the battery cable provided (check the appropriate polarity) and the cable to the USB
charger. Connect the charger to the mains. EL estimated charge time is 50 minutes but it depends on
the state of the battery, the font used for loading, etc.
When connecting the cable to the power (no battery connected) red indicator lights. When
connecting the battery this indicator will turn off and remain off during charging. When charging is
completed, the indicator lights again.
- During charging keeps the battery in a dry and ventilated place away from ignition sources. 18-25⁰
temperature.
- Use the accessories supplied for charging.
- Do full loads. This will prolong the life of the battery.
- Use only original batteries.
REMOTE CONTROL
Insert 4 batteries "AA2 on the remote control. The red light starts flashing rapidly
indicating that it is seeking the DRON connection. Once connected remains solid red
color.
Once the batteries flashes red slowly run out.
You can adjust the movements with the buttons.
Publicidad
