Publicidad
Idiomas disponibles
Idiomas disponibles
ON
1) Turn on DRON connecting the battery.
2) Turn on the remote control, the red indicator flashes quickly until you connect
with DRON.
3) IMPORTANT: When you turn the knob, make sure the lever off is in the down
position. From the engine so could crash or cause an uncontrolled flight that
seriously damage the DRON.
Step 1: Connect the battery following the proper polarity and place the DRON on a
flat surface.
Step 2: Turn off lever in the down position. Turn the remote control and wait for
connect and light stays fine. You can now fly the DRON.
Step 3: Once the flight is completed, disconnect the battery.
Step 4: If you will not use the device for a long period of time, remove the batteries
from the remote control.
ADJUSTMENT OF FLIGHT
Practice with slow movements before long flights or taller. Use the device in an
open area, in the absence of objects that may interfere with the flight.
First perform simple turns left and right, forward and backward.
Red lights indicate the front of the DRON. You can also locate the front and rear
parts according to the color of the propellers.
AUTO frequency adjustment. Press as indicated in the figure:
This will adjust the DRON and you can start over from 0.
Publicidad
