Publicidad
Idiomas disponibles
Idiomas disponibles
EN
6.4
INSTALL THE BATTERY PACK
• If the battery pack or charger is damaged, replace
the battery pack or the charger.
• Stop the machine and wait until the motor stops
before you install or remove the battery pack.
• Read, know, and do the instructions in the battery
and charger manual.
1.
Align the lift ribs on the battery pack with the
grooves in the battery compartment.
2.
Push the battery pack into the battery
compartment until the battery pack locks into
place.
3.
When you hear a click, the battery pack is
installed.
6.5
REMOVE THE BATTERY PACK
1.
Push and hold the battery release button.
2.
Remove the battery pack from the machine.
7
OPERATION
Always wear eye protection.
Do not use any attachments or accessories not
recommended by the manufacturer of this product.
WARNING
WARNING
WARNING
English
7.1
FORWARD / REVERSE SWITCH
The machine has the switch (forward / reverse) above
the trigger to change rotation.
1.
When the switch is on the left side of the trigger,
the drive direciton is forward (tightening).
2.
When the switch is on the right side of the trigger,
the drive direction is reversed (loosening).
3.
Put the switch in the OFF (center lock) position to
help decrease the possibility of accidental starting
when not operating.
Let the coupler to come a complete stop before
changing the direction of rotation.
7.2
START THE MACHINE
The machine can not work until the reverse switch is
pushed fully to the left or right. Do not operate the
machine at low speeds for extended periods of time.
1.
Pull the trigger to turn the machine ON.
Variable speed
The machine has a variable speed switch that delivers
higher speed with increased trigger pressure and lower
speed with decreased trigger pressure.
8
WARNING
NOTE
Publicidad
