Anti-High Temperature; Burst Prevention; To Prevent Falling Wounding; Uv Protection And The Bulb Explosion - Mark BEAM SPOT Instrucciones De Usuario

This product is only suitable for indoor, IP20 protection class. Lamps should be kept dry to avoid
Moisture, overheating or dusty environment. Prevent lamps come into contact with water or any
other liquid.
The use of this product should pay attention to: fire, heat, electric shock, ultraviolet radiation, the
lamp to explode or
Shedding caused serious or fatal injury.
Need to read the instructions before use energized or installing.
Follow through the operation of security methods and pay attention to the warning signs on the
specification and equipment. If you have any problem for how to safely operate the equipment.
Please contact your dealer.

2.1 ANTI-HIGH TEMPERATURE

Ta =40
Please don't use the equipment if the temperature above 40º C

2.2 BURST PREVENTION

The lens should be changed if had damaged or any problems. Don't change the
non-original manufacturer lens.
Len size：￠1136×60 mm

2.3 TO PREVENT FALLING WOUNDING

Please don't move the package by one person only.
When Hang the fixture, please must verify that the facilities to be able to withstand the weight
of the lamps at least 10 times more.
Please make sure the Mounting hardware is strong enough no any damage, and insurance
for the safety rope as auxiliary security fixed in other facilities will need to verify before
installation. Installing or removing the equipment, to make the pulley below the work location.

2.4 UV PROTECTION AND THE BULB EXPLOSION

Prohibit straight viewpoint with exposed bulbs to avoid UV damage to the eyes;
Do not use the equipment without the lens screen and the lid;
BEAM SPOT User Manual/Manual de uso Page 2
EN