HIKOKI UM 22VYST Instrucciones De Manejo página 5

h) Keep handles and grasping surfaces dry, clean
and free from oil and grease.
Slippery handles and grasping surfaces do not allow
for safe handling and control of the tool in unexpected
situations.
5) Service
a) Have your power tool serviced by a qualifi ed
repair person using only identical replacement
parts.
This will ensure that the safety of the power tool is
maintained.
PRECAUTION
Keep children and infi rm persons away.
When not in use, tools should be stored out of reach of
children and infi rm persons.
MIXER SAFETY INSTRUCTIONS
a) Hold the tool with both hands at the intended
handles. (Fig. 6)
Loss of control can cause personal injury.
b) Ensure suffi cient ventilation when mixing fl ammable
materials to avoid a hazardous atmosphere.
Developing vapour may be inhaled or be ignited by the
sparks the power tool produces.
c) Do not mix food.
Power tools and their accessories are not designed for
processing food.
d) Keep the cord away from the working area.
The cord may be entangled by the mixer basket.
e) Ensure that the mixing container is placed in a fi rm
and secure position.
A container that is not properly secured may move
unexpectedly.
f) Ensure that no liquid splashes against the housing
of the power tool.
Liquid that has penetrated the power tool can cause
damage and lead to electric shock.
g) Follow the instructions and warnings for the
material to be mixed.
Material to be mixed may be harmful.
h) If the power tool falls into the material to be mixed,
unplug the tool immediately and have the power
tool checked by a qualifi ed repair person.
Reaching into the bucket with the tool still plugged in can
lead to electric shock.
i) Do not reach into the mixing container with your
hands or insert any other objects into it while
mixing.
Contact with the mixer basket may lead to serious
personal injury.
j) Start up and run down the tool in the mixing
container only.
The mixer basket may bend or spin in an uncontrolled
manner.
PRECAUTIONS ON USING THE MACHINE
1. Do not use the power tool for explosive materials
(e. g., easily infl ammable solvents).
Power tools produce sparks which could ignite
developing vapours.
2. In case the power tool should fall into the material
to be stirred, pull the plug immediately and have the
power tool checked by an after-sales service agent.
Material that has penetrated the power tool can cause
damage and lead to an electric shock.
3. When working with the machine, always hold it
fi rmly with both hands and provide for a secure
stance.
The power tool is guided more secure with both hands.
4. Do not work materials containing asbestos.
Asbestos is considered carcinogenic.
5. Take protective measures when dust can develop
during working that is harmful to one's health,
combustible or explosive.
Example: Some dusts are regarded as carcinogenic.
Wear a dust mask and work with dust/chip extraction
when connectable.
6. Always wait until the machine has come to a
complete stop before placing it down.
The tool insert can jam and lead to loss of control over the
power tool.
7. Never use the machine with a damaged cable. Do
not touch the damaged cable and pull the mains
plug when the cable is damaged while working.
Damaged cables increase the risk of an electric shock.
8. When operating a mixer with wet material avoid
splashes up to the motor part.
9. Connect machines that are used in the open via a
residual current device (RCD).
NAMES OF PARTS (Fig. 1 – Fig. 6)
Brush cap
1
Speed control dial
2
Lock for ON
3
Trigger
4
Stirrer paddle
5
Gear shift dial
6
Stirrer (L)
7
Stirrer (R)
8
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
UM 22VYST / UM 16VST2 / UM 12VST2:
Mixer
To reduce the risk of injury, user must read
instruction manual.
English
Nut (L)
9
Nut (R)
0
Extension bar
!
(18.5 mm)
Spindle
@
Wrench (19 mm)
#
Wrench (22 mm)
$
Wrench (28 mm)
%
5