Manuales relacionados para Truper ASP-12
Resumen de contenidos para Truper ASP-12
- Página 1 Manual Vacuum 12 gal Capacity Applies for: Code Model 101509 ASP-12 ASP-12 Read this manual thoroughly CAUTION before using the tool.
- Página 2 Parts using the tool. Assembly Keep this manual for future references. Start Up The illustrations in this manual are for reference Maintenance only. They might be different from the real tool. Troubleshooting Notes Authorized Service Centers Warranty Policy ASP-12 ENGLISH...
- Página 3 Technical data ASP-12 Code 101509 Description Vacuum Voltage 127 V Frequency 60 Hz Current 10 A Maximum power 5 Hp Rated power 1 260 W Capacity 12 gal Vacuuming pressure 12.4 kPa (1.8 PSI) Outflow pressure 13.8 kPa (2 PSI) Conductors 16 AWG x 2C with insulating temperature of 221 °F...
- Página 4 General power tool safety warnings WARNING! Read carefully all safety warnings and instructions listed below. Failure to comply with any of these warnings may result in electric shock, fire and / or severe damage. Save all warnings and instructions for future references.
- Página 5 Safety warnings for vacuum cleaners Dangerous materials While operating the vacuum cleaner WARNING • Do not vacuum or use the vacuum CAUTION • Keep hair, loose clothing, fingers and cleaner near flammable liquids, gases or explosive fumes any other body parts away from openings and moving such as gasoline or other types of fuel, lighter fluid, hot parts.
- Página 6 Parts Handle Switch Switch Mount for Container accessories Blowing Cable port holder Vacuum port Opening latches Vacuum port Power Cord Container Casters Drain Extension wands Car nozzle Claw type nozzle Crevice nozzle Secure fit hose Foam filter Filter cartridge for dry for liquids ENGLISH...
- Página 7 Assembly • Pull the latches (A) outwards to lift the motor cover (B). • Remove all accessories from inside the container. • The dry vacuum cloth filter (C) is factory installed, remember to use the vacuum cleaner with one of the filters installed otherwise the motor will be damaged and the warranty will be void.
- Página 8 Start Up Dry vacuuming • Open the vacuum as instructed on page 6 to verify that the dry vacuum cloth filter is properly installed. • If not, hold the motor cover by the handle and install the filter in the filter cage (H) as shown. Then install the motor cover in place.
- Página 9 Maintenance Cleaning Carbon brush replacement • After each use, remove the residue from the container • The carbons should be checked periodically, and always and hose. be replaced by a Authorized Service • Always keep the ventilation openings of the motor cover Center when they have worn out.
- Página 10 Notes ENGLISH...
- Página 11 In the event of any problem contacting a Authorized Service Center, please see our webpage www.truper.com to get an updated list, or call our toll-free numbers 800 690-6990 or 800 0187-8737 to get information about the nearest Service Center. DE TODO PARA LA CONSTRUCCIÓN FIX FERRETERÍAS...
- Página 12 . Transportation costs resulting from compliance of this warranty will be covered by For questions or comments, call 800-690-6990. Made in China. Imported by Truper S.A. de C.V. Parque Industrial 1, Jilotepec, Edo. de Méx. C.P. 54240 Stamp of the business.