Work Pro W MULTIPLAYER 12 WEB Manual De Instrucciones página 11

has no effect on the clock's time.
The unit will auto-update from the selected source when time information is available.
Manual set
If you set No update, the wizard now prompts you to set the time and date manually.
The date and time are displayed as dd-mm-yyyy and
hh:mm AM/PM with the first value, dd, active
(flashing).
Adjust each value with the Select control. As each
value is set, the next value becomes active and
flashes.
3.1.3 Network
The unit is compatible with all common network protocols and encryption methods,
including Wi-Fi Protected Setup (WPS).
To connect the unit to your network, you need one of the following:
• A wired router and an Ethernet (RJ45 network) cable
• A Wi-Fi wireless router, together with password key if set
Select WLAN region/country > Wi-Fi network
(SSID), and then select a network from the list.
To connect to a wired network, select [Wired], after
ensuring that the Ethernet cable from the wired router
is connected to the Ethernet socket of the unit.
If the network is open (non-encrypted), the unit connects without any further ado; see
Completion below.
Standard encrypted network
To enter the network's key (password), use the
Select control to move the cursor through the
characters and select. As each character is
selected, the key is built up near the top of the
display.
There are three options accessible by turning
Select back before the first characters
(0123...) – Backspace, OK and Cancel.
WPS encrypted network
WPS encrypted networks are identified by
'[WPS]' at the start of the network name, and
have three methods of connection. Select one
and follow the prompts:
• Push Button >
The unit prompts you to press the
connect button on the router. It then
scans for a ready Push Button
Connect network and connects.
PAG. 10
User Manual/Manual de Instrucciones
EN
MULTIPLAYER 12 WEB