AENO SC3 Manual De Instrucciones página 11

the room temperature is too high or too low. Solution: use the vacuum cleaner
at temperatures between 0 °C and +40 °C.
The charge indicator does not change its reading during charging. Possible
causes: non-original power adapter used, the battery is out of order. Solution:
Use only the original power adapter to charge the vacuum cleaner.
ATTENTION! If your problem persists, please contact your local supplier or the
service center for support. Please do not disassemble the device or try to repair
it on your own.
These symbols indicate that you must follow the Waste Electrical and Electronic
Equipment (WEEE) and Waste Battery and Battery Regulations when disposing of
the device, its batteries and accumulators, and its electrical and electronic accessories.
According to the rules, this equipment must be disposed of separately at the end of
its service life. Do not dispose of the device, its batteries and accumulators, or its
electrical and electronic accessories together with unsorted municipal waste, as this
will harm the environment. To dispose of this equipment, it must be returned to the
point of sale or turned in to a local recycling facility. You should contact your local household waste
disposal service for details.
ASBISc reserves the right to modify the device and to make edits and changes to this document
without prior notice to users.
The warranty period and service life shall be 2 years as from the date of purchase of the device.
Information about the manufacturer: ASBISc Enterprises PLC, Iapetou, 1, Agios Athanasios, 4101,
Limassol, Cyprus. Made in China.
For current information and details on the device description and specification, as well as
connection process, certificates, warranty and quality issues, see relevant Installation and
Operation Manuals available for downloading at aeno.com/documents. All trademarks and names
herein are the property of their respective owners.
aeno.com/documents 11