Publicidad
EN
Congratulations on your new Sebra product.
THE PRODUCT IS DESIGNED WITH A SCANDINAVIAN AND TIMELESS LOOK THAT HARMONISES WITH THE OTHER FURNITURE FROM SEBRA'S CLASSIC FURNITURE COLLECTION.
THE PRODUCT IS ECO-LABELLED WITH THE EU FLOWER AND IS MADE FROM FSC™-CERTIFIED WOOD AND OTHER CONTROLLED MATERIALS (LICENCE NUMBER: FSC™ C160100).
LET THE PRODUCT BE HANDED DOWN – FROM CHILD TO CHILD, FROM FAMILY TO FAMILY.
WE HOPE THAT YOUR FAMILY WILL ENJOY THE PRODUCT FOR MANY YEARS, AND THAT YOU WILL TAKE GOOD CARE OF IT SO THAT MORE CHILDREN CAN USE IT.
MIA DELA
FOUNDER OF SEBRA
ABOUT THE DESIGN
THE SEBRA CHANGING UNIT IS DESIGNED BY SEBRA.
THE SEBRA CHANGING UNIT IS DESIGNED IN AN EXPRESSION THAT MATCHES THE SE-
BRA BED, BABY & JR. AND THE SEBRA BED, JUNIOR & GROW.
THE SEBRA CHANGING UNIT IS DESIGNED FOR DOMESTIC USE.
THE SEBRA CHANGING UNIT IS DESIGNED FOR INDOOR USE.
PRODUCT WEIGHT: 35.1 KG.
TESTING AND COMPLIANCE: THE SEBRA CHANGING UNIT MEETS THE SAFETY RE-
QUIREMENTS OF EN 12221-1+ A1:2013 – CHILD USE AND CARE ARTICLES - CHANGING
UNITS FOR DOMESTIC USE
DIMENSIONS: HEIGHT: 90 CM, WIDTH: 74 CM, DEPTH: 66 CM
INSTRUCTIONS:
THE PRODUCT MUST BE ASSEMBLED BY AN ADULT.
MAKE SURE THAT THE SURFACE ON WHICH THE PRODUCT IS PLACED IS NOT UNEVEN.
THE CHANGING UNIT IS TESTED TO CHANGE 0-12 MONTH OLD INFANTS WITH A MAXI-
MUM WEIGHT OF 11 KG.
NO CHANGES MUST BE MADE TO THE ORIGINAL PRODUCT, ONLY ORIGINAL SPARE
PARTS FROM THE MANUFACTURER MAY BE USED.
PRODUCT PARTS AND ASSEMBLY
THIS PRODUCT CONTAINS SMALL PARTS THAT MUST BE KEPT AWAY FROM SMALL
CHILDREN. IF POSSIBLE, SAVE THE PACKAGING IF THE PRODUCT WILL BE STORED AT
A LATER DATE. WHEN DISPOSING OF PACKAGING, YOU SHOULD COMPLY WITH LOCAL
REGULATIONS.
CHECK THE CONTENTS OF THE PACKAGE BEFORE THE PRODUCT IS ASSEMBLED. A
COMPLETE LIST OF PRODUCT PARTS CAN BE FOUND ON PAGE 22. IN THE UNLIKELY
EVENT THAT SOMETHING IS MISSING, PLEASE CONTACT THE DISTRIBUTOR WHO SOLD
YOU THE PRODUCT.
THIS PRODUCT TAKES APPROX. 25 MINS. TO ASSEMBLE AND INSTALL. IT TAKES 1
PERSON TO ASSEMBLE AND INSTALL THE PRODUCT. A PHILLIPS SCREWDRIVER IS RE-
QUIRED TO ASSEMBLE AND INSTALL THE PRODUCT – THIS IS NOT INCLUDED. DO NOT
USE AN ELECTRIC DRILL/SCREWDRIVER, AS IT MAY DAMAGE OR SCRATCH THE PROD-
UCT.
FOLLOW THE ASSEMBLY INSTRUCTIONS AND GET AN OVERVIEW BEFORE STARTING AS-
SEMBLY.
MATERIALS
SEE PAGE 74 FOR AN OVERVIEW OF MATERIALS.
THE PRODUCT HAS NOT BEEN TREATED WITH, AND DOES NOT CONTAIN, BIOCIDAL
PRODUCTS FOR DISINFECTING PURPOSES.
ALTHOUGH THE PAINTED/VARNISHED SURFACE IS VERY ROBUST, IT CANNOT BE AVOID-
ED THAT MINOR MARKS, SCRATCHES AND/OR PEELING MAY OCCUR ON THE SURFACE
WITH DAILY USE OVER TIME. MARKS AND MINOR SCRATCHES CAN BE REPAIRED WITH
TOUCH-UP PAINT. PLEASE NOTE THAT IT IS NOT POSSIBLE TO ACHIEVE THE SAME SUR-
FACE FINISH WITH TOUCH-UP PAINT AS WITH THE ORIGINAL SURFACE.
MAINTENANCE GUIDE – CLEANING AND CARE
ALL PRODUCTS ARE AFFECTED BY SUNLIGHT – EVEN THE MOST COLOURFUL AND COL-
OURFAST PRODUCTS CAN FADE. YOU SHOULD THEREFORE KEEP THE PRODUCT AWAY
4
FROM DIRECT SUNLIGHT. WOOD IS A STURDY AND LIVING NATURAL MATERIAL. THE
STRUCTURE AND COLOURS WILL CHANGE OVER THE LIFE OF THE PRODUCT DUE TO
THE WOOD'S CONTINUOUS TRANSFORMATION PROCESS.
WOOD ADAPTS TO ITS SURROUNDINGS, SO AVOID PLACING THE PRODUCT IN A ROOM
WITH FLUCTUATING HUMIDITY, AND ALWAYS PROTECT THE PRODUCT FROM STRONG
HEAT SOURCES SUCH AS RADIATORS, FIREPLACES, ETC. AS THESE COULD AFFECT OR,
IN THE WORST CASE, DRY OUT THE WOOD. EXPOSURE TO DRAMATIC TEMPERATURE
VARIATIONS OR HIGH HUMIDITY CAN ALSO DAMAGE THE PRODUCT, AND IT SHOULD
THEREFORE BE USED AND STORED WITH THIS IN MIND.
THE PRODUCT IS CLEANED WITH A CLOTH SOAKED IN WARM, SOAPY WATER. ALWAYS
USE A SOFT CLOTH TO AVOID SCRATCHES, AND ALWAYS GIVE THE BED A FINAL WIPE
WITH A SLIGHTLY DAMP CLOTH. NEVER USE ABRASIVE CLEANERS, ALCOHOL-BASED
AGENTS, BLEACHES OR SHARP OBJECTS WHEN CLEANING.
CHANGING PAD
ONLY USE A CHANGING MAT/TABLE PAD WITHOUT BARRIERS, AS THE CHANGING
UNIT IS CONSTRUCTED WITH EFFECTIVE BARRIERS. THE CHANGING MAT/TABLE PAD
SHOULD BE PLACED IN THE MIDDLE OF THE CHANGING UNIT SO THAT THERE IS A
GOOD DISTANCE TO THE EDGES OF THE CHANGING UNIT. WE RECOMMEND USING A
CHANGING MAT/TABLE PAD WITH A NON-SLIP SURFACE.
SPARE PARTS
SEBRA OFFERS SPARE PARTS FOR EU FLOWER-LABELLED PRODUCTS. IF PARTS ARE
FOUND TO BE DEFECTIVE AFTER NORMAL PRIVATE USE, SPARE PARTS WILL BE MADE
AVAILABLE FREE OF CHARGE UPON PRESENTATION OF A VALID RECEIPT FOR A PERIOD
OF 5 YEARS FROM THE DATE OF PURCHASE. IF THE PARTS ARE DAMAGED BY MISUSE OR
ARE LOST, SPARE PARTS CAN BE PURCHASED. READ MORE ABOUT HOW AND WHERE
YOU CAN BUY SPARE PARTS AT WWW.UK.SEBRA.DK
PRODUCT WARRANTY TERMS AND CONDITIONS
SEBRA PROVIDES AN EXTENDED PRODUCT WARRANTY ON EU FLOWER-LABELLED
PRODUCTS FOR A PERIOD OF 5 YEARS FROM THE DATE OF PURCHASE. THE WARRANTY
COVERS BREAKAGE OF COMPONENTS AND DAMAGE DURING NORMAL PRIVATE USE,
CAUSED BY DEFECTIVE WORKMANSHIP. WE EMPHASISE THAT NATURAL VARIATIONS
IN THE WOOD CANNOT BE CONSIDERED AS ERRORS OR DEFECTS, AND SEBRA THERE-
FORE DOES NOT GUARANTEE COLOURFASTNESS OR MATCHING OF SURFACE COLOURS
OR HARDNESS, GRAINS OR TEXTURES.
IF A COMPLAINT IS JUSTIFIED AND FALLS UNDER THE MENTIONED GUARANTEES,
SEBRA WILL REPAIR, REPLACE OR REFUND THE PRODUCT IN QUESTION, DEPENDING
ON THE SPECIFIC CASE. SEBRA ALONE WILL DECIDE WHAT TYPE OF REMEDIAL ACTION
WILL BE TAKEN. IT IS REQUIRED THAT A BATCH NUMBER BE PROVIDED (FOUND ON THE
BACK OF THESE ASSEMBLY INSTRUCTIONS AND UNDER THE BASE OF THE PRODUCT)
AS WELL AS A PURCHASE INVOICE WHEN SUBMITTING A WARRANTY CLAIM.
READ MORE ABOUT THE PRODUCT GUARANTEE AT WWW.UK.SEBRA.DK
THE WARRANTY IS VOIDED BY
•
THE PRODUCT SHOWING VISIBLE TRACES OF WEAR
•
SIGNS OF MISUSE
•
SIGNS OF MISSING/INCORRECT MAINTENANCE ACCORDING TO THE MAINTE-
NANCE GUIDE
•
THE PRODUCT HAVING SUFFERED DAMAGE, INCORRECT ASSEMBLY, IMPROPER
OPERATION, IMPROPER USE OR STORAGE, ETC.
•
THE USE OF THIRD-PARTY MATERIALS ON THE PRODUCT OR CHANGES TO THE
PRODUCT, E.G. NEW PAINT OR VARNISH
DISPOSAL OF THE PRODUCT – RECYCLING AND DISASSEMBLY.
LET THE PRODUCT BE HANDED DOWN – FROM CHILD TO CHILD, FROM FAMILY TO FAMI-
LY. IF THIS IS NOT AN OPTION, THEN WE RECOMMEND THAT YOU TRY TO RESELL IT, E.G.
VIA A RESALE PLATFORM. IF, FOR WHATEVER REASON, THE PRODUCT IS NO LONGER
FIT TO SERVE ITS PURPOSE, YOU SHOULD TAKE IT APART FOR SORTING AND DISPOSAL.
USING A PHILLIPS SCREWDRIVER, LOOSEN THE VARIOUS SCREWS AND BOLTS BY
Publicidad
