Techmade HAVA Manual página 29

INSTRUCTIONS
1. Charging instructions
Charge the device before use.
To recharge the device, insert the USB port into a
charger (5V 1A) or PC and correctly position the
magnetic connector on the back of the smartwatch.
Notice:
1) Use the charging cable only on a dry, flat and stable
surface.
2) If there is an obstacle between the smartwatch and the
charging cable, the smartwatch may not charge properly.
3) After charging the smartwatch, disconnect the power (do
not leave the device charging for whole nights). To avoid
damaging the device, use only the supplied cable.
4) Do not use if the charging cable is damaged.
5) Disconnect the charging cable when cleaning the
smartwatch, during a thunderstorm or during a prolonged
period of non-use.
6) Do not attempt to disassemble or modify the smartwatch
and charging cable.
7) Do not twist or pinch the charging cable.