Publicidad
Idiomas disponibles
Idiomas disponibles
irons or fan heaters.
• Do not try to salvage an electrical appliance which has fallen into water.
• Turn the unit off when you put it down.
• When using the hairdryer, always make sure that grid X (fig. 1) is not
obstructed. Lack of air suction will overheat the appliance, temporarily di-
sabling it.
• Do not use hair-spray while the appliance is switched on.
Installation:
The wall holder may be installed in one of two ways:
A = for fixed connection lead
B = for mobile connection lead
Attention: before installing the wall holder always switch off
the general switch of your mains electricity.
Each time the appliance is opened, the switch must be used to disconnect
the appliance. The cable to connect to the power supply must be type
H05VV-F 2x1,5 mm
Use and product care:
Hairdryer switch 2 (Fig.1):
ON=On/Off (pressure must be maintained to operate the hairdryer)
Slide Switch 2 (Fig.1):
Cool = (low power)
1 = (medium power)
2 = (maximum power)
• When not in use, the mains switch 2 (Fig.1)
should be in the "Off" position.
• The hairdryer requires no special care or attention.
• You can clean your appliance with a cloth dampened with water.
Attention: The cleaning of hairdryers with detergents, solvents, alcohol
and other chemical products is strictly prohibited. When necessary, the air
inlet grill should be cleaned with a soft brush or by vacuum cleaner.
2
.
4
Publicidad
