Lega 6705 Manual De Instrucciones página 19

MAINTENANCE INSTRUCTIONS
Before carrying out any cleaning or maintenance operations, always unplug the machine from the power line.
Carry out any stainless steel equipment part maintenance by complying with the following instructions:
• clean the surfaces thoroughly with a damp cloth; water and soap or common detergents can be used
as long as they do not contain any abrasives, staining agents or chlorine;
• only wipe in the satin finish direction;
• rinse with water only and wipe perfectly dry;
Cleaning is important to ensure that the equipment characteristics are preserved.
Caution: When cleaning the equipment, never use direct pressurised water jets which could cause infiltrations
and damage the internal parts of the equipment. Exclusively use a damp cloth.
Maintain the electrical parts of the cabinet by regularly checking that the electric input cable is intact; replace
the cable if it shows signs of wear-and-tear. Arrange for general equipment overhauling at least once a year.
DISPOSAL
At the end of the product's life cycle, to prevent the equipment from being dispersed into the environment,
dispose of it in compliance with the regulations in force in the country of use (WEEE European Community
Directive 2012/19/EU on waste electrical and electronic equipment ).
WARRANTY
In the event that the aforementioned SAFETY RULES are not respected, the guarantee provided by the
manufacturer is void.
LEGA
srl
Costruzioni Apistiche – via Maestri del Lavoro 23 – 48018 Faenza
www.legaitaly.com - Tel 054626834 – Fax 054628279 – P.iva 00043230390
19 / 58