Hilti SIW 2-A12 Manual De Instrucciones Original página 32

4.2 Battery
Battery operating voltage
Weight, battery
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
4.3 Noise information and vibration values in accordance with EN
62841
The sound pressure and vibration values given in these instructions were
measured in accordance with a standardized test and can be used to
compare one power tool with another.
preliminary assessment of exposure.
The data given represent the main applications of the power tool. However,
if the power tool is used for different applications, with different accessory
tools, or is poorly maintained, the data can vary. This can significantly
increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times
when the power tool is switched off, or when it is running but not actually
being used for a job. This can significantly reduce exposure over the total
working period.
Identify additional safety measures to protect the operator from the effects
of noise and/or vibration, for example: maintaining the power tool and
accessory tools, keeping the hands warm, organization of work patterns.
Noise information
Sound power level, L
Sound pressure level, L
Uncertainty (noise values) (K
Total vibration
Vibration emission value when tightening
screws/bolts and nuts of the maximum
permitted size a
Uncertainty (vibration emission value) K
26 English
WA
pA
and K
pA
h
10.8 V
See the end of these
operating instructions
−17 ℃ ... 60 ℃
−20 ℃ ... 40 ℃
−10 ℃ ... 45 ℃
They can also be used for a
105 dB
94 dB
) 3 dB(A)
WA
5.3 m/s²
1.5 m/s²
2384752
*2384752*