Hortensus HOR-BSL4W Manual Del Propietário página 17

Please read and follow all instructions to operate.
Save this manual for future reference.
INSTALLATION
1. Please use the card to measure hole position and drill 3 holes of φ6mm
2. Fix 3 expansion plugs into the holes.
3. Fix a screw to the lower expansion plug with a spare space, insert the notch
onto the screw.
4. Straighten the whole lamp and fasten the upper screw.
5. Press the button to adjust to demanded working mode.
Notice
1. This is a solar powered lamp, please install it in a location where can get enough
sunshine.
2. The lamp will light up automatically at dusk.
3. Please note the lighting time depends on sunshine duration and weather.
4. Built-in intelligent IC is with over-charge, over-discharge and over-voltage
protection.
Warning
1. The lamp is equipped with an internal lithium battery, which is replaceable. If and
need, please contact the seller for new battery.
2. If the battery is taken out & put back in or replaced with new ones, please toward
the solar panel to sunshine or a strong light to activate the lamp.
3. Non-professionals please do not disassemble the lamp.
4. Please do not exposure the battery with household garbage to avoid explosion.
17
1. Hole
2. Expansion Plug
3. Screw
4. Mounting Hole
5. Button
EN