Sound Oasis Deluxe S-6000 Manual De Instrucciones página 22

3. Your S-6000 will continue to play your last played S-6000 built-
in sound until you start playing sound/music from your Bluetooth
enabled device. Then your streamed sound will play on your S-6000
instead of your last played built-in S-6000 sound.
Note 1: You can stop playing your Bluetooth streamed music/sound
and switch back to your last S-6000 built-in sound at anytime by
pressing the SOUNDS button again.
Note 2: If you do not pair your Bluetooth enabled device to your
S-6000 within 5 minutes of first pressing the SOUNDS button, the
Bluetooth feature on your S-6000 will automatically shut off to save
energy You will have to press the SOUNDS button again to reactivate
the Bluetooth feature for another 5 minutes.
Note 3: Once you pair your Bluetooth enabled device to your S-6000,
you do not need to pair it again.
For example: You have been listening to the sound 25 NIAGARA FALLS
on your S-6000 and have previously paired your smartphone to your
S-6000. You simply press the SOUNDS button on your S-6000 (the last
played 25 NIAGARA FALLS starts playing) and this automatically turns
on the Bluetooth feature on your S-6000. Now all you need to do is
start playing the sound/music from your smartphone and it will play
through your S-6000.
Important Note About Alarms: The alarms on your S-6000 will not
work while you are streaming from your Bluetooth enabled device.
While streaming, you will need to use the alarms on your Bluetooth
enabled device.
Headphone Jack
The headphone jack accepts a 1/8" (3.5 mm) monaural or stereo type
plug. Sound from the internal speakers will turn off when this jack
is in use.
A-20