Publicidad
Idiomas disponibles
Idiomas disponibles
Playing from USB-stick or Micro SD card
• Turn the speaker ON.
• Insert a USB stick into the port (8) or insert a Micro-SD card into the slot (9), the stored music
will be played automatically.
• While playing, press [-] or [=] (8/12) to select the previous or next song.
Note: If a USB/SD is inserted in Bluetooth or AUX input mode, playback starts automatically. To
return to the previous mode, press the [MODE] button.
AUX-IN:
You can connect an external device e.g. MP3 player to the AUX-in (7) of this device using a
jack-to-jack (cable included).
• When an external device is connected, The device will switch to Aux-in mode automatically.
• Start playing music on your external device.
Note: The playback controls on this unit will not function in this mode, and you cannot enter
Bluetooth mode using the [Mode] button.
TWS
1. Turn on two identical speakers that you want to pair, note that they must have the same BT pairing
name. You only need to set up one of the two devices.
2. Long press the [q] button (9) of one of the speakers, this speaker makes a tone to start pairing and
makes 3 tones when successfully paired.
3. Make a Bluetooth connection with your mobile phone to play music through the two paired
speakers to create a more powerful stereo sound.
4. When you want to exit TWS mode, long press the [1] button (11) again.
Note:
• Users need to make TWS connection first, then make Bluetooth connection with the mobile phone.
• Under TWS mode and Bluetooth connected, when user long press the TWS button, both the TWS
connection and Bluetooth connection will be disconnected.
• Under the TWS mode, if you connected your mobile phone to the device (you set at beginning) via
the provided audio cable, it will start to play AUX via TWS function, under this status, you can not
switch to Bluetooth mode by pressing the Mode button.
Publicidad
