Publicidad
Idiomas disponibles
Idiomas disponibles
CONNECTION OF THE SOCKET TO THE NETWORK -
1
STEP
ST
RESET: Press
seconds
until the
display stops blinking.
2
STEP
ND
Press
2seconds
until JOINING ap-
pears on the display.
3
STEP
RD
Click on the com-
mand button of the
Installation Key (Ref.
40925) in close prox-
imity to the Socket.
18
15
ONLINE
1.1 - After 2 seconds,
RESET starts blinking
and after 15 seconds , it
stops blinking, indicating
that it was been done.
2.1 - After 2 seconds JOIN-
ING starts to blink, indi-
cating that it is ready to be
added to the network, for
a period of 10 seconds .
3.1 - The LED starts to blink
red, indicating that it is
searching for the device that
is going to be added.
3.2 - The LED blinks green
and switches off, and the
Socket Display show EFAPEL
/ ONLINE, indicating that
the Socket was successfully
added to the network.
Note: If the Installation Key LED
does not turn green and switch
off, repeat from the 1
step.
st
Publicidad
