Work Pro W MD 82 AX Manual De Uso página 3

1.0 Introduction
MD 82 AX is a mixer for microphones which integrates a large series of attractive features that allow to optimize the
installation and to outfit with multiple audio signal control and management possibilities. This mixer incorporates 8
balanced inputs. It provides individual input level control and master level.
The encoder in the frontal side allows to navigate through a configuration menu with the different parameters on each
channel. Among the functions to be performed, we can set three tone control, low-pass and high-pass filters (with
frequency adjustment) and 4 anti-feedback levels.
All this information is showed in the LCD display. All inputs have switch to enable the connection of +48V phantom power
supply microphones. The two features that represent an interesting development are the Auto-mixer functionality and
the RS485 interface for external commands
1.1 Features:
ٜ
8 Microphone inputs(with 48V phantom power)
ٜ
Each signal with high cut, low cut
ٜ
Each signal with AGC
ٜ
Each signal FBC feedback suppression
ٜ
Each signal has Three-band EQ
ٜ
Two mixed output
ٜ
RS485 remote control(PC or centre control)
1.2 Front control characteristics
1. Input level control knob.
2. Output Master volume control.
3. LCD display, when the light is blue, the AC power has been switched on, and is in a normal state of operation.
.
4 Encoder control, each channel of the high, bass, high pass, low pass filter, feedback gain control.
5. The output signal display lamp. when the light is green ,it has signal input. when the light is red ,
it is clipping.For example, when the signal reaches the distortion threshold will light up the red light.
5
1 1
2
User Manual / Manual de uso
2 3
EN
4
MD 82 AX