Publicidad
Idiomas disponibles
Idiomas disponibles
Method 2:
1. Stop the cleaner.
2. Pull the buoyancy cable slightly to enable the cleaner in water to move to
water side slowly.
EN
3. Hold the handle of the cleaner to pull it out of the water surface, and hang it
above the water surface for 10-20s to empty the water inside it.
Note: It is forbidden from pulling the buoyancy cable directly on water surface, so as
to avoid fracture and damage.
APP
Download CHASING GO3 APP
1
CHASING GO3 App: (applicable to iOS
9.0/Android 4.4 and above versions) Scan
the QR to download or visit iOS App
Store/ Google Play/Official Website of
Chasing for downloading.
Wi-Fi Connection
2
Connect the cleaner and the control box
property according to the "Instruction for Use,
and energize the control box.
Then enter Wi-Fi Connection interface in
Mobile Phone/Tablet Setting, and wait for
10-15s, to connect to Chasing_XXXX, Wi-Fi
password: 12345678.
09
Setting
Wi-Fi
Wi-Fi
Select network
Chasing-CM600
Homepage
3
9:41
Mode
Normal Mode (2h)
Switching
Cleaner status
Standby
Start
Cleaning
Water
temperature
Start Cleaning
Connection
27℃
status of the
Temperature
control box
One-button
recycling (available
when the cleaner is
One-key reclycling
in water)
Homepage
Appointment
Manual
Appointment
4
When the cleaner is in standby state and is placed in water of the swimming
pool, Create Appoint Cleaning can be performed to complete unattended
operation.
9:41
9:41
Timing/Delay
Create timed cleaning
Set times cleaning time
Timing
Enable your cleaner to start auto
cleaning within designated time
Create timed cleaning
Enter Create Timing interface
Repeat
9:41
Delay
Cleaning Mode
Enable your cleaner to start
cleaning after specific time
Set delayed cleaning time
Create Delay Cleaning
08
09
10
11
12
Create Appoint Cleaning Plan
Enter Create Delay interface
Cleaning Mode
Normal Mode
Custom Mode
Normal Mode (2h)
Pool bottom, pool wall and waterline
Rapid Mode (1h)
Pool bottom
Enhancement Mode (2h)
Pool bottom, pool wall and waterline
Switch to required mode
9:41
Select the cleaning mode
connected
Select shape of the swimming pool
Square
Round
Other shape
Mine
Custom Mode
9:41
Timing/Delay
10:11
Start Auto Cleaning
8
9
9
10
Repeat
Monday, Tuesday, Wednesday,
10
11
Thursday, Friday, Saturday
Cleaning Mode
11
12
Standard Mode (2h) ｜ Pool bottom,
waterline and pool wall
12
13
Modify Timing
Only once
10:11:59
Standard mode (2h)
modifying the delay
Create Delay
Cleaning Mode
Standard Mode (2h) ｜ Pool bottom,
waterline and pool wall
9
Start to clean after
10
11
Hours
Minutes
12
13
Complete appointed
cleaning plan
Standard mode (2h)
EN
10
Publicidad
