Output Connections - Work Pro W PA 1000 Manual De Uso

Precaution of installation
1.Do not block ventilation holes.
2.The amplifier should not be places areas:
1)With poor ventilation .
2)Exposed to direct sunlight .
3)With high ambient temperature or adjacent to heat generating
equipment.
4)With high humidity or dust levels.
5)Susceptible to vibration.
3.Do not use this unit if the electrical power cord is frayed or broken.
4.Always operate the unit with the AC ground wire connected to the
electrical system ground.
5.If PROTECT LED is on, it means that the unit has found a problem
and has entered in protection mode. Disconnect the amplifier and
check the unit and connections until found the problem.
CAUTION
To reduce the risk of electric shock, do not remove the cover.
No user parts inside. Refer servicing to qualified service personnel.

OUTPUT CONNECTIONS

AC INPUT:
~220-230V, 50/60Hz
Connecting multiple speakers in parallel to the 100V output
0 100V 0 100V 0 100V
Connecting two speakers in series (8 ohm total load) to
the low impedance output.
User Manual/Manual de Uso
4
INPUT
+
- -
4 ohm 4 ohm
PA 1000
EN
+