JVC RD-F421B Manual De Instrucciones página 30

Disc repeat mode
While the disc is playing, repeatedly press
Symbol on the display Description
To repeat a single track
To repeat all tracks in the folder (for MP3 only)
To repeat all tracks
Random playback
Normal playback
No symbol
USB OPERATION
Inserting and removing a USB memory device
Carefully insert a USB memory device into the
Selecting USB mode
Repeatedly press to select the USB mode.
Playback control in USB mode is similar to CD mode.
NOTE: The USB memory device should not be removed during playback as damage or corruption of files may occur.
AUX IN
Connect an audio cable (not supplied) to the
auxiliary device.
Repeatedly press to select the AUX mode.
You can play music from an auxiliary device through the speakers of the player.
BLUETOOTH OPERATION
By using the Bluetooth connection, you can listen to the sound of the Bluetooth audio device from this unit wirelessly.
Pairing Bluetooth devices
Turn on the Bluetooth function of the device and place the device near this unit.
If this unit is already connected to a Bluetooth device, disconnect it.
1. Repeatedl y press to select the Bluetooth mode.
"bt" will flash on the display.
2. Select "RD-F421B" from the Bluetooth device's Bluetooth menu.
3. Once pairing is successful, "bt" will stop flashing.
4. Start play on the Bluetooth device.
NOTE:
The effective operation range between the unit and the paired Bluetooth device is approximately 10 metres in the open area.
Once the Bluetooth device is connected for the first time, the speaker will remember the paired setting and will automatically reconnect to the same
Bluetooth device the next time they are in range.
When you want to playback from another Bluetooth device, press and hold
in use.
TROUBLESHOOTING
Problem
The player will not play.
CD skips while playing.
Radio sound distorted.
No radio sound.
SPECIFICATIONS
Power source:
FM Frequency range:
Frequency range:
Maximum output Power:
Alternating current
USB: 5V DC , 50mA
Direct Current
to select the desired repeat mode.
port. To remove the USB memory device simply pull it out.
jack on the front of the unit. Connect the other end to a suitable output socket on your
Possible Cause
1. Unit not in CD mode.
2. CD is not installed or installed incorrectly.
Disc is dirty or scratched.
1. The station is not tuned in.
2. There is interference.
1. The unit is not in radio mode.
2. The volume is on the minimum setting.
AC 230V~, 50Hz 10W
FM 87.5 – 108 MHz
2402-2480MHz
2dBm
for about 3 seconds to disconnect the unit from the Bluetooth device already
Possible Solution
1. Select CD mode.
2. Load a CD with label side up.
Wipe the disc with a cloth or use another
disc.
1. Fine tune the station.
2. Reposition the unit.
1. Select radio mode.
2. Adjust the volume level.
EN-4