Publicidad
Idiomas disponibles
Idiomas disponibles
Soak the Glass Stem and Metal Screen in
rubbing alcohol until the oils and residues
dissolve (30 minutes or longer). Clean the
Accessory Attachment and Silicone with warm,
soapy water. Rinse all parts thoroughly with
clean water, and dry before reassembling.
Brush the oven of any debris, then wipe it
clean with a cotton swab dipped in rubbing
alcohol. Hold the V3 PRO upside down while
you clean the oven so alcohol doesn't drip
into the heater below.
Tip: Perform a burnoff cycle at max temp for
2 minutes after cleaning with alcohol.
18
Publicidad
